Differences

This shows you the differences between two versions of the page.

--- blocks:app-note:nexmosphere_v2 [2026-11-02 13:18] – [Installation] mattias
+++ blocks:app-note:nexmosphere_v2 [2026-11-02 13:52] (current) – [Hardware requirements] mattias
@@ Line 28: / Line 28: @@
 | 8 | XW-L56 X-Wave LED strip | The FlashGreen and FlashWhite Tasks |
-:!: **Without the demo board, use the same ports.** You can build the same setup from an 8-port Nexmosphere controller, such as an XN-180, and separate elements. If you connect the devices manually, make sure each one goes to the same port as on the demo board. The driver names each element after its type, model and port, for instance ''TOF_XY240_5'', and the blocks and Tasks bind to those names, so an element on another port gets another name and the examples stop responding to it. If you must use other ports, name the elements in the driver options, as described in the [[blocks:nexmosphere|driver documentation]], and update the paths in the blocks and Tasks.
+:!: **Without the demo board, use the same ports.** You can build the same setup from an 8-port Nexmosphere controller, such as an XN-185, and separate elements. If you connect the devices manually, make sure each one goes to the same port as on the demo board. The driver names each element after its type, model and port, for instance ''TOF_XY240_5'', and the blocks and Tasks bind to those names, so an element on another port gets another name and the examples stop responding to it. If you must use other ports, name the elements in the driver options, as described in the [[blocks:nexmosphere|driver documentation]], and update the paths in the blocks and Tasks.
 ===== Installation =====