PIXILAB Wiki

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
blocks:spot:samsungsmartsignage [2019-06-03 11:29]
mattias 		blocks:spot:samsungsmartsignage [2024-10-25 07:47] (current)
admin
Line 1: Line 1:
-====== Samsung Smart Signage ======+====== Samsung Smart Signage ======  
 +   
 +This guide shows how to setup a Tizen-based Samsung Smart Signage display for use with Blocks. 
 + 
 +:!: **IMPORTANT**  Samsung Smart Signage displays have many limitations such as video performance, inability to perform some transitions (e.g. Dissolve) involving video, no active video synchronization across displays, compared to our PIXILAB Player. Test actual or respresentative content and block types  to make sure it performs as desired. 
 + 
 +The example screenshots shown below are from Samsung QB43N model. Other models may have slightly different user interface. Please refer to Samsungs documentation for details.    
 +   
 +First prepare a working environment with a, preferably using our Linux-based server image. If desired, also enable DNS and DHCP as described under [[blocks:server:creating_a_server|Creating a server]], [[blocks:server:first_start|First Start]] and [[blocks:server:advanced_server_configuration|Advanced Configuration]].  
 + 
 +:!: As an alternative to using the remote to set up the display, you may use a USB keyboard. That makes it easier to enter some options, such as the server URL. If so, the //menu// button mentioned below corresponds to the Windows key and the //home// button corresponds to F5. 
 + 
 +  * Connect the display to the network. 
 +  * If the display is brand new, the setup wizard will start.   
 +  * Alternatively, in case the display has been used previously, press menu on the remote, select System and Start Setup (if this option is disabled, then you must first set the display's input to HDMI to enable it). 
 + 
 +{{ :blocks:blocks:spot:samsung:samsung_setup_language.jpg?600 |}}  
 +   
 +  * Set your preferred language.  
 +   
 +{{ :blocks:blocks:spot:samsung:samsung_setup_orientation.jpg?600 |}}  
 +   
 +  * Set your display orientation.  
 +   
 +{{ :blocks:blocks:spot:samsung:samsung_setup_auto_power.jpg?600 |}}  
 +   
 +  * Set auto power to off.  
 +   
 +{{ :blocks:blocks:spot:samsung:samsung_setup_connection.jpg?600 |}}  
 +   
 +  * Set the network to Wired (assuming that's what you want) and Automatic or DHCP.  
 +   
 +{{ :blocks:blocks:spot:samsung:samsung_setup_time.jpg?600 |}}  
 +   
 +  * Set the time and date.  
 +   
 +{{ :blocks:blocks:spot:samsung:samsung_setup_urllauncher.jpg?600 |}}  
 +   
 +  * Set to play via URL launcher. 
 +  * For displays based on Tizen 7, this is referred to as "Custom App"   
 +   
 +{{ :blocks:blocks:spot:samsung:samsung_setup_url_input.jpg?600 |}}  
 +   
 +  * Type %%http://pixi.guide/tizen%% in URL bar. 
 +  * For displays based on Tizen 7, type %%http://pixi.guide/tizen7%% (requires Blocks version 6.3 or later).  
 +  * If your network/DNS isn't set up to resolve pixi.guide to your Blocks server, replace the domain name with the IP address of yor Blocks server. 
 +  
 +:!: To change this URL once the initial setup has been completet, press the HOME button (with a small house) on the remote control then select "URL Launcher Settings" or (for Tizen 7) "App Management". 
 + 
 +{{ :blocks:blocks:spot:samsung:samsung_setup_display_name.jpg?600 |}}  
 +   
 +  * Name the display as desired.  
 +   
 +{{ :blocks:blocks:spot:samsung:samsung_setup_confirmation.jpg?600 |}}  
 +   
 +  * Click "Done" to close the guide.   
 + 
 + 
 + Finally change the input source to "URL Launcher".  
 +   
 +  
 +  
 +===== Controlling display power from Blocks ===== 
 + 
 +In order to turn //on// the display from Blocks, Wake-on-LAN must be recognized by the display. Do as follows: 
 + 
 +  * Press "Menu" or "Settings" on the remote control.  
 +  * Locate the "Power" settings and set the "Network StandBy" or "Remote Management" option to //off//. (Yes, setting this option to //off// to allow the display to be turned on remotely using Wake-ON-LAN is rather counter-intuitive.) 
 +  * Press "Home" on the remote control. 
 +  * Locate the "Device ID" setting.  
 +  * Set the PC connection cable option to "RJ45(LAN)/Wifi".  
 + 
  
-This guide shows how to setup an Samsung Smart Signage with Tizen 4.0 as an Display spot in Blocks.  
  
-Prepare a working environment with a server running Blocks server, dns-server and dhcp server as done in the server guides [[blocks:server:creating_a_server|Create a server]], [[blocks:server:first_start|First Start]] and [[blocks:server:advanced_server_configuration|Advanced Configuration]]. 
  
-  * Connect the Tv to the network. 
-  * If the display is new the setup wizard will start. If the display has been used , press menu on the remote, select System and Start Setup. This option is disabled if  input is set to URL launcher or Magic Info set input to HDMI to enable it.