Differences

This shows you the differences between two versions of the page.

--- blocks:server:mirror [2024-10-25 07:43]
admin Broken Links
+++ blocks:server:mirror [2025-02-13 20:01] (current)
admin Added Sync Errors note
@@ Line 1: / Line 1: @@
 ====== Blocks Mirroring Service ======
-Our Linux-based server (dated 2020-05-25 and later, running Ubuntu 20.04), supports a redundancy feature for increased system reliability. While the Blocks server software is very robust, the complete system can never be more reliable than the hardware it runs on.
+Our Linux-based server supports a hardware redundancy feature for increased system reliability. While the Blocks server software is very robust, the complete system can never be more reliable than the hardware it runs on.
 ===== Introduction =====
@@ Line 268: / Line 268: @@
   * Server Disk Space. Indicates the amount of free space on the Blocks Server itself. This also makes sens to keep an eye on – especially before adding a significant amount of new content.
   * Server Time. Shows the current time of the clock in the Blocks Server. If your server has Internet access, this is generally adjusted automatically. If not, you may want to check this every few monts to make sure that it is reasonably accurate.
+  * Sync Errors. Cumulative count of data sync errors that have occurred, if any. Check the Mirror log file for details.
-The SYNCHRONIZE NOW button can be used to force a full synchronization. Use this after making manual changes to the files in the /home/pixi-server directory of the Blocks server, such as updating Blocks itself or the mirroring service (the files PIXILAN.jar and MIRROR.jar respectvely). Doing so pushes those changes over to the Mirror Server immediately rather than waiting for the next scheduled full synchronization.
+The "Synchtronize Now" button can be used to force a full synchronization. Use this after making manual changes to the files in the /home/pixi-server directory of the Blocks server, such as updating Blocks itself or the mirroring service (the files PIXILAN.jar and MIRROR.jar respectvely). Doing so pushes those changes over to the Mirror Server immediately rather than waiting for the next scheduled full synchronization.
 ===== Testing the Mirror Server =====
@@ Line 328: / Line 329: @@
   * Set java.util.logging.FileHandler.level to //ERROR// for less verbose logging, or //INFO// for more details (sometimes useful when troubleshooting).
-The settings under //logging// follow the java.util.logging standard, sometimes referred to as JUL, allowing you to use any settings available there, for example to log to an external log handler.
+The following additional, advanced settings are available in version 7.1 and later, then specified under the "mirror:" heading as shown above.
+<code>
+  interface: enp2s0
+  subnet: 192.168.0.0/24
+</code>
-=====Troubleshooting=====
+:!: **NOTE**: There are two spaces at the beginning of each line, as required when used under the "mirror:" heading.
-The server-to-server connection relies on that connection using self-assigned ("link local") addresses. Such adresses are in the 169.254.x.x address range. There must not be any other network interfaces in either computer having such IP addresses. If there are, make sure you disable any such interfaces, or change their address to keep them out of this address range.
-Some server class computers have a built in remote management network interface that may then also appear in Linux, often with such a 169.254.x.x address. You may not be able to disable or change the address of such a network interface in Linux. Instead, you can disable this in the computer's remote management settings. Here's a screenshot giving and example of how this is done on a Supermicro server.
+  * The //interface// setting is useful if your computer have more than one network interface with link local addressing. If so, use this setting to specify the name of the desired synchronization backdoor network interface.
+  * The //subnet// setting lets you specify a non link local subnet (in CIDR notation) for use as the data synchronization backdoor. This is useful in cases where you may want to use this interface for other purposes, such as remote management of the servers. You would then either set fixed addresses (within the specified subnet) or use dynamically assigned addresses (DHCP).
-{{ :blocks:server:mirror:disable-bmc-nic-for-host-os.png?direct&600 |}}
+The settings under //logging// follow the java.util.logging standard, sometimes referred to as JUL, allowing you to use any settings available there, for example to log to an external log handler.
+=====Troubleshooting=====
+Unless the advanced //subnet// setting is used (see above), the server-to-server backdoor connection assumes the use of self-assigned ("link local") addresses. Such adresses are in the 169.254.x.x address range. There must not be any additional network interfaces in either computer having such IP addresses. If there are, do either of the following:
+  * Disable any such interface(s). in some cases this may need to be done in the computer's BIOS settings.
+  * Change their addresses to keep them out of this address range.
+  * Use the advanced //nic// setting to specify which interface to use.
 === Verifying over SSH ===