PIXILAB Wiki

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
blocks:server:pxe-boot [2023-03-15 10:16]
mattias [Implementation Details] 		blocks:server:pxe-boot [2023-03-15 10:20]
mattias [Network Boot of PIXILAB Player]
Line 2: Line 2:
 This document describes how to configure your existing [[blocks:server:creating_a_server|Linux-based Blocks server]] to allow [[blocks:porteus_kiosk|PIXILAB Player]] to boot from the server over the network, rather than from a USB stick or internal drive. This document describes how to configure your existing [[blocks:server:creating_a_server|Linux-based Blocks server]] to allow [[blocks:porteus_kiosk|PIXILAB Player]] to boot from the server over the network, rather than from a USB stick or internal drive.
  
-If your server came with Blocks 3 or later from the outset, most of this is already done. If so, you can skip down to [[#installing_pixilab_player_on_the_server|Installing PIXILAB Player on the server]] and continue from there.+If your provisioned your server from the desktop server image provided by Pixilab, most of this is already done. If so, you can skip down to [[#installing_pixilab_player_on_the_server|Installing PIXILAB Player on the server]] and continue from there.
  
 :!: If you bring in a Blocks data folder from an older (pre-Blocks 3) installation, you must update the configuration file to enable the tftp server, as described below. Alternatively, consider re-installing your server based on the latest server image. :!: If you bring in a Blocks data folder from an older (pre-Blocks 3) installation, you must update the configuration file to enable the tftp server, as described below. Alternatively, consider re-installing your server based on the latest server image.
Line 79: Line 79:
  
 ===== Installing PIXILAB Player on the server ===== ===== Installing PIXILAB Player on the server =====
-First install the PIXILAB Player [[blocks:porteus_kiosk|on a USB stick]]. Make sure you use PIXILAB Player version 3.0.1 or later. Test the resulting USB stick by booting your player computer from it, as you may have done in the past. This is a good way to make sure the player itself works as desired before transferring it to the server. Once you have a working USB stick, proceed as follows:+First install the PIXILAB Player [[blocks:porteus_kiosk|on a USB stick]]. Test the resulting USB stick by booting your player computer from it, as you may have done in the past. This is a good way to make sure the player itself works as desired before transferring it to the server. Once you have a working USB stick, proceed as follows:
  
   * Insert the player USB into your Linux-based Blocks server. It will appear as a number of disks.   * Insert the player USB into your Linux-based Blocks server. It will appear as a number of disks.