PIXILAB Wiki

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
blocks:server:first_start [2020-05-13 06:58]
mattias [Basic Network Configuration] 		blocks:server:first_start [2024-10-22 12:29] (current)
admin Fixed links
Line 1: Line 1:
-====== First Start ====== +====== First Start ======   
  
-   +This article assumes you have just prepared a brand-new Linux-based server, as [[blocks:server:creating_a_server|described here]].  
- +
-   +
- +
-** +
-If you are looking for instructions for Ubuntu 18.04 based systems, [[blocks:archive:server:first_start|follow this link]].**  +
- +
-   +
- +
-   +
- +
-   +
- +
-This article assumes you have just prepared a brand-new Linux-based server, as described in [[creating_a_server|]].  +
  
 Connect keyboard and mouse to the server, then turn on the power. After some brief initial messages, the screen shown below should appear.  Connect keyboard and mouse to the server, then turn on the power. After some brief initial messages, the screen shown below should appear. 
  
-  +{{:blocks:first-run:20_04lts:missingkey.png?1000|}}
  
-   +This message indicates that the license key isn't connected. Find your license key and plug it into a USB connector on the server. The server should now start.
- +
-{{:blocks:first-run:20_04lts:missingkey.png?1000|}}  +
- +
-   +
- +
-This message indicates that there's no PIXILAB License key connected. Find your license key and plug it into a USB connector on the server. The server should now start.  +
- +
-  +
  
 {{:blocks:first-run:20_04lts:blockssplash.png?1000|}}  {{:blocks:first-run:20_04lts:blockssplash.png?1000|}} 
- 
-  
 ===== Setting Passwords =====  ===== Setting Passwords ===== 
  
-   +Before you do anything else, you //**must**// set the server's passwords.
- +
-Before you do anything else, you //**must**// set the server's passwords.   +
- +
-  +
  
 :!: It is **very important** that you perform these steps, choosing good, strong passwords, before proceeding. If you don't do this, you leave your server open to anyone that may know the default passwords.  :!: It is **very important** that you perform these steps, choosing good, strong passwords, before proceeding. If you don't do this, you leave your server open to anyone that may know the default passwords. 
- 
-   
  
 There are two users at the operating system level:  There are two users at the operating system level: 
- 
-   
  
   * The account named //pixi-server// is a limited account, used to run the server.    * The account named //pixi-server// is a limited account, used to run the server. 
  
-  * The account named //pixi-admin// is an administrator account, used to make changes to the server's operating system. +  * The account named //pixi-admin// is an administrator account, used to make changes to the server's operating system.   
  
-  +Note that both these accounts are related only to the server's operating system. Neither of these passwords are needed for the day-to-day operation of Blocks. In addition to these two OS-level users, there's also an //admin// user inside the BLOCKS Server program, which is configured later in this article.
  
-Note that both these accounts are only related to the server's operating system. Neither of these passwords are needed for the day-to-day operation of the system. In addition to these two OS-level users, there's also an //admin// user inside the BLOCKS Server program, which is configured later in this article.  +To change the Linux user's passwords, start by clicking the cogwheel button in the area of icons along the left-hand side of the screen. This opens the "System Settings" window. Select "Users" in the list on the left hand side.
- +
-   +
- +
-To change the Linux user's passwords, start by clicking the cogwheel button in the area of icons along the left-hand side of the screen. This opens the "System Settings" window. Click the small search icon on the top left and type "Users" to get to the Users settings. Never mind the Network Manager message in the settings window we will show how to make the network settings later.  +
- +
-   +
- +
-{{:blocks:first-run:20_04lts:settingsusers.png?1000|}}  +
- +
-   +
- +
-Click the "User Accounts" button in the bottom row.  +
- +
-  +
  
 {{:blocks:first-run:20_04lts:unlock.png?1000|}}  {{:blocks:first-run:20_04lts:unlock.png?1000|}} 
  
-   +Click the "Unlock…" button in the top right-hand corner of this window to allow for changes. This prompts you for the admin user's password. If this is the first time you configure the server, type //pixi// into the password field. If you have already configured the server, type the appropriate administrator password instead. Then select the //pixi-server// user and click the "Password ••••" field to change the password. 
- +
-Click the padlock symbol in the top right-hand corner of this window to allow for changes. This will prompt you for the admin user's password. If this is the first time you configure the server, type //pixi// into the password field. If you have already configured the server, type the appropriate administrator password instead. Then select the //pixi-server// user and click the "Password ••••" field to change the password.  +
- +
-  +
  
 {{:blocks:first-run:20_04lts:passwordpixiserver.png?500|}}  {{:blocks:first-run:20_04lts:passwordpixiserver.png?500|}} 
- 
-   
  
 First type the old password for the //pixi-server// user. If this is the first time you configure the server, type //PixiServer!// into the Current Password field. If you have already configured the server, type the appropriate password instead. Type the new password into the two following fields, then click Change.  First type the old password for the //pixi-server// user. If this is the first time you configure the server, type //PixiServer!// into the Current Password field. If you have already configured the server, type the appropriate password instead. Type the new password into the two following fields, then click Change. 
  
-   +Repeat the procedure for the //pixi-admin// user, here selecing the "Set a password now" option. Choose a strong password and make a secure note of this in a safe place, as this will be required to make any further changes to the server's configuration. 
- +
-Repeat the procedure for the //pixi-admin// user. Make sure you choose a strong password and make a secure note of this in a safe place, as this will be required to make any further changes to the server's configuration.  +
- +
-  +
  
 {{:blocks:first-run:20_04lts:passwordpixiadmin.png?500|}}  {{:blocks:first-run:20_04lts:passwordpixiadmin.png?500|}} 
- 
-   
  
 Click Change to apply the new password, then close the User Accounts window.  Click Change to apply the new password, then close the User Accounts window. 
  
-  
 ===== Basic Network Configuration =====  ===== Basic Network Configuration ===== 
- 
-   
  
 Connect a network cable to the server. Connect the other end of the cable to a network switch. If connecting to an existing network, you need to obtain a suitable network address from your systems administrator. The remainder of this article assumes a new network is being established, where you're free to choose the addresses and other network parameters shown.   Connect a network cable to the server. Connect the other end of the cable to a network switch. If connecting to an existing network, you need to obtain a suitable network address from your systems administrator. The remainder of this article assumes a new network is being established, where you're free to choose the addresses and other network parameters shown.  
  
 The process of basic network settings is moving back to the GUI based Network Manager from being handled from Webmin in Pixilab blocks Linux images based on Ubuntu 18.04. It is still possible to use that method if one enables Netplan to handle network settings.   The process of basic network settings is moving back to the GUI based Network Manager from being handled from Webmin in Pixilab blocks Linux images based on Ubuntu 18.04. It is still possible to use that method if one enables Netplan to handle network settings.  
- 
-   
  
 Open the settings drop down menu from the right-hand side of the top bar.  Select Wired Settings.  Open the settings drop down menu from the right-hand side of the top bar.  Select Wired Settings. 
- 
-   
  
 {{:blocks:first-run:20_04lts:topbarsettings.png?1000|}}  {{:blocks:first-run:20_04lts:topbarsettings.png?1000|}} 
- 
-   
  
 Click the cog wheel to edit the wired connection settings.  Click the cog wheel to edit the wired connection settings. 
- 
-   
  
 {{:blocks:first-run:20_04lts:networkwiredcogwheel.png?1000|}}  {{:blocks:first-run:20_04lts:networkwiredcogwheel.png?1000|}} 
- 
-   
  
 Select the IPv4 tab, edit the settings and confirm with apply.    Select the IPv4 tab, edit the settings and confirm with apply.   
  
-   +{{:blocks:first-run:20_04lts:ipv4settings.png?600|}}
- +
-{{:blocks:first-run:20_04lts:ipv4settings.png?600|}}  +
- +
-  +
  
-Toggle the purple enable button next to Wired to apply the new settings.  +**IMPORTANT**: Always toggle the purple enable button under "Wired" off then back on again to apply the new settings.  
  
 {{:blocks:first-run:20_04lts:toggleenabled.png?600|}}  {{:blocks:first-run:20_04lts:toggleenabled.png?600|}} 
- 
-   
- 
-   
  
 === Configure DNS ===  === Configure DNS === 
- 
-   
  
 :!: Only specify an upstream DNS if you need this to access external services from your Blocks system. This is not required for a stand-alone system without internet access.  :!: Only specify an upstream DNS if you need this to access external services from your Blocks system. This is not required for a stand-alone system without internet access. 
- 
-   
  
 Use the same method as above and add your favorite DNS servers to the settings.  Use the same method as above and add your favorite DNS servers to the settings. 
- 
-   
  
 {{:blocks:first-run:20_04lts:ipv4withdns.png?600|}}  {{:blocks:first-run:20_04lts:ipv4withdns.png?600|}} 
- 
-   
- 
-   
- 
-  
- 
-  
 ===== First Access ===== ===== First Access =====
  
Line 168: Line 76:
   * Netmask: 255.255.0.0   * Netmask: 255.255.0.0
  
-Make sure the settings are applied. The address chosen here is arbitrary, and the last group of digits can be anything between 2 and 254, except 10 (which is the server already connected to the same network). Open a web browser on this other computer, and type //10.2.0.10/edit// into the address bar at the top. If the connection succeeds, you will be prompted to enter a user name and password:+Make sure the settings are applied. The address chosen here is arbitrary, and the last group of digits can be anything between 2 and 254, except 10 (which is the server). Open a web browser on this other computer, and type //10.2.0.10/edit// into the address bar at the top. If the connection succeeds, you will be prompted to enter a user name and password:
  
   * Name: //admin//   * Name: //admin//
Line 191: Line 99:
 :!: Make a note of this password in a safe place. :!: Make a note of this password in a safe place.
  
-After completing this basic set-up, you may want to continue with more [[Advanced Server Configuration]].+After completing this basic set-up, you may want to continue with more [[advanced_server_configuration| Advanced Server Configurtion]]. Before you start using your shiny, new Blocks server you should also consider what [[blocks:server:backup|Backup Strategy]] suits your needs best. Regardless of the method chosen, //any// backup is far better than no backup. So make sure you take this important aspect of a Blocks installation into consideration from the start.