Differences

This shows you the differences between two versions of the page.

--- blocks:drivers:delta-controls-o3 [2023-07-13 10:11]
admin [Delta Controls O3 Edge Sensor Hub]
+++ blocks:drivers:delta-controls-o3 [2023-07-13 10:17]
admin Linked to the O3 product
@@ Line 1: / Line 1: @@
 ====== Delta Controls O3 Edge Sensor Hub ======
-This guide explains how to connect the Delta Controls O3 Edge Sensor Hub to Blocks. It is assumed that the O3 Edge Sensor Hub has been set up and that the internal MQTT broker has been enabled according to the official instructions (found [[https://delta-o3.zendesk.com/hc/en-us/categories/4498059346323-How-To-Set-It-Up|here]]).
+This guide explains how to connect the [[https://deltacontrols.com/products/o3-sensor-hub/|Delta Controls O3 Edge Sensor Hub]] to Blocks. It is assumed that the O3 Edge Sensor Hub has been set up and that the internal MQTT broker has been enabled according to the official instructions (found [[https://delta-o3.zendesk.com/hc/en-us/categories/4498059346323-How-To-Set-It-Up|here]]).
 You will need the ConfigurableMQTT driver available in the [[https://github.com/pixilab/blocks-script|PIXILAB blocks-script GitHub repo]], as well as the {{ :blocks:drivers:deltacontrols:o3edge.json | JSON configuration file for the O3 Edge}}. See [[blocks:drivers:concepts#using_a_device_driver|this wiki page]] for information on installing drivers. It is assumed that you are running a Mosquitto MQTT broker, such as the one pre-installed on our Linux server image, that has been configured according to [[blocks:server:advanced_server_configuration:mqtt|this guide]].