PIXILAB Wiki

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
blocks:app-note:nexmosphere [2021-04-21 12:36] – [Program RFID tags to be used with Nexmosphere RFID sensors] mattiasblocks:app-note:nexmosphere [2023-12-20 13:21] (current) – [Use Nexmosphere sensors and actuators with Blocks] mattias
Line 1: Line 1:
 ======Use Nexmosphere sensors and actuators with Blocks====== ======Use Nexmosphere sensors and actuators with Blocks======
  
-This is an application note that describes how to get started using Nexmosphere sensors and actuators with experiences managed by Blocks. + 
 +This is an application note that describes how to get started using Nexmosphere sensors and actuators with experiences managed by Blocks. 
 + 
 +:!: The method in this application note is useful if connecting a Nexmosphere controller with a 3.5mm serial connector using a serial network server such as Moxa N-Port. From Blocks version 6.1 it is possible to connect a Nexmosphere with built-in serial to usb controller directly to Pixilab Players USB port. Please consult the manual for more details about serial devices in blocks.  
  
 =====Hardware requirements====== =====Hardware requirements======
Line 7: Line 10:
 In the examples we use the following hardware: In the examples we use the following hardware:
  
-Nexmosphere [[https://nexmosphere.com]]  +  * [[https://nexmosphere.com|Nexmosphere]] XN-180 Experience controller. This is the "hub" device, with a serial port connected using a 3,5mm jack. 
- +  * XT-EF650 Gesture sensor. 
-XN-180 Experience controller (This is the hub, and this version has a 3,5mm serial port) +  * XR-DR1 RFID Pick up sensor. 
- +  * XW-L9 X-WAVE animating led strip. 
-XT-EF650 Gesture sensor +  * Moxa [[https://www.moxa.com/en/products/industrial-edge-connectivity/serial-device-servers/general-device-servers/nport-5100-series|NPort 5100 Series]] - 1 Port Serial Device to TCP/IP Server. 
- +  * 3.5mm to D-SUB cable that connects the XN-180 to the Moxa Nport.
-XR-DR1 RFID Pick up sensor +
- +
-XW-L9 X-WAVE animating led strip +
- +
- +
-Moxa +
- +
-[[https://www.moxa.com/en/products/industrial-edge-connectivity/serial-device-servers/general-device-servers/nport-5100-series|NPort 5100 Series]] - 1 Port Serial Device to TCP/IP Server +
- +
-3.5mm to dsub cable that connects the XN-180 to the Moxa Nport.+
  
  
Line 156: Line 149:
  
 {{:blocks:app-note:nexmosphere:readnexmotag.png?400|}} {{:blocks:app-note:nexmosphere:readnexmotag.png?400|}}
- 
-This should be the final result from reading the tag with ID 255. 
-{{:blocks:app-note:nexmosphere:resultfftag.png?400|}} 
  
 If I want to program a new tag with no 255 I would set the application to write tag mode with the following settings and press the write tag button while holding the tag to the mobiles NFC sensor: If I want to program a new tag with no 255 I would set the application to write tag mode with the following settings and press the write tag button while holding the tag to the mobiles NFC sensor:
Line 164: Line 154:
 {{:blocks:app-note:nexmosphere:writefftag.png?400|}} {{:blocks:app-note:nexmosphere:writefftag.png?400|}}
  
 +This should be the final result from reading the tag with ID 255.
 +
 +{{:blocks:app-note:nexmosphere:resultfftag.png?400|}}