PIXILAB Wiki

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Last revision Both sides next revision
blocks:app-note:netio_modbus [2024-03-14 14:57]
admin [Control Netio Power Distribution Units using Modbus/TCP] 		blocks:app-note:netio_modbus [2024-03-14 15:04]
admin [Control Netio Power Distribution Units using Modbus/TCP]
Line 1: Line 1:
 =====Control Netio Power Distribution Units using Modbus/TCP===== =====Control Netio Power Distribution Units using Modbus/TCP=====
  
-This application note assumes minimum Blocks version 6.3.1 due to enhancements done with the modbus support. +This application note, and the method it describes, requires Blocks version 6.3.1 or later. 
-At time of writing all current models of Netio power distribution units support modbus via its M2M (machine2machine) +All current models of Netio's Power Distribution Units (PDU) support Modbus. 
-This method requires slightly less configuration compared to the [[blocks:app-note:netio|MQTT method]].  It gives access to all properties available on the device including power metering. +The Modbus method requires less configuration compared to the [[blocks:app-note:netio|MQTT method]], while providing access to all properties of the device, including power metering. 
  
 ====Setup in the Device==== ====Setup in the Device====